C-Clip Eliminator Kit | GM 10 & 12 Bolt Truck

$240.00
In stock
SKU
BSG5

Price may go up based on selections.

C CLIP Eliminator Kit | GM Truck | A-1031

WARNING: C-clip eliminator safety hubs are an inexpensive way to eliminate the c-clips to meet the NHRA, IHRA and SFI racing guidelines and are not intended for permanent c-clip elimination. Dutchman does not recommend them for street use. For permanent c-clip elimination, 9” Ford style billet ends must be welded on your housing. See our section on billet ends or contact your favorite Dutchman sales representative for more details.
 
C-clip eliminator kits are available for most 10 Bolt and 12 Bolt GM rear ends and will work with your stock drum brakes. They are made to press on the 1.533 bearing journal surface of your aftermarket or stock axle and safely retain it from the outside with 4 backing plate bolts.

NOTE: The 1.620 bearing journal must be machined to 1.533 on GM Truck and Impala axles. Some modifications may have to be made if you intend to use aftermarket disc brakes.
 
Sold in Pairs.
Made in the USA [By Strange Engineering]
Actual product may appear different than picture.
 
Application and Part number:
-GM 10/12 Bolt, Truck, 1.620 Bearing journal, #A-1031, (Axle shaft machining required)

Warning: Cancer and Reproductive Harm
www.p65Warning.ca.gov

Write Your Own Review
You're reviewing:C-Clip Eliminator Kit | GM 10 & 12 Bolt Truck
Copyright © 2017-2023 Dutchman Motorsports, Inc. All rights reserved.