C Clip Eliminator Kit | GM 10 & 12 Bolt Car

WARNING: C clip eliminator safety hubs are an inexpensive way to eliminate the c clips to meet the NHRA, IHRA and SFI racing guidelines and are not intended for permanent c clip elimination. Dutchman does not recommend them for street use. For permanent c clip elimination, 9 inch Ford style billet ends must be welded on your housing. See our section on billet ends or contact your favorite Dutchman sales representative for more details.

 

C clip eliminator bearings are available for most 10 & 12 Bolt GM rear ends and will work with your stock drum brakes. They are made to press on the 1.400 or 1.533 bearing journal surfaces of your aftermarket or stock axle and safely retain it from the outside with 4 backing plate bolts. Some modifications may have to be made if you intend to use aftermarket disc brakes.
 

Sold in Pairs.
Made in the USA [By Strange Engineering]
Actual product may appear different than picture.

 

-GM 10 Bolt /12 Bolt, car, 1.400 Bearing journal, #A-1033

-GM 10 Bolt /12 Bolt, car, 1.533 Bearing journal, #A-1030