Buick Olds Pontiac Stock Replacement Rear Axle | Bolt in Type | Single

$180.00
In stock
SKU
SRPOB1B

Price may go up based on application, hardware choices, and whether a single or pair.

Buick, Olds, Pontiac Stock Replacement Rear Axles

SR Chart(s):
-GM Cars, Buick, Olds, Pontiac
->Click Here< [57-64 drop out, 10 and 12 bolt rear ends]
    -Delta 88, Wildcat, Catalina, Grand Prix, GTO, Olds 98, Bonneville, Cutlass, Lemans, Tempest, Skylark, Firebird, Vista cruiser, Riviera, 442, Trans AM, IROC, Camaro.

We are well known for our custom “made to order” high performance axle shafts, but we also have a growing number of stock replacement axle shaft part numbers we can build as well. At Dutchman, ordering a stock replacement axle or axles just got easier. Rather than fill out a blank order form or send us a sample axle, you can refer to an application specification chart to confirm what you are looking for and purchase by number, either a single or pair. As an added bonus, we allow the length or bolt pattern to be changed as well and at no extra charge for the alteration.

Press on Bearing bolt in stock application axle prices start at;
$180 for a single axle with studs (NO bearing or Retainer plate)
$330 for a pair with studs (NO bearings or Retainer plates)
Price may change based on application, hardware choices, and whether a single or pair.

Made in the USA (right here in Meridian Idaho)
Actual product may appear different than the pics.
Chart dimensions are approx. and subject to change. Double check twice and we’ll make them once! Call if you can’t find your application or if your application is listed without a Dutchman part number.
This listing is for GM Buick, Olds, Pontiac cars only. Click on a link below if another application is desired.

Features:
-Forged alloy 1541-H material [25% stronger than stock 1039 material]
-Stock replacement or custom alterations
    -Stock or custom lengths [If narrowing the housing for wider tires]
    -Spline change [If switching to an aftermarket limited slip differential or spool, like an Eaton posi or a Strange spool]
    -Stock or a custom bolt pattern change


Other stock application listings:
-Mopar-Chrysler Cars [8 ¾, 8.75, & Dana 60 rear ends]
-Mopar-Chrysler Trucks [NA, chart to come soon]
-GM Cars, Chevy [10-12 bolt, Dana 44, and 55-64 drop out type rear ends] 
-GM, GMC Trucks [Dana 44, 45, and Dana 60 rear ends]
-Ford Cars [8-9 inch and Dana 60 rear ends]
-Ford Trucks [9 inch, 9 3/8, Dana 44, and Dana 60 rear ends]
-Jeep
-Scout and International Harvester [IHC]
-Wagoneer

Ordering instructions:
-Click on a link above to download a chart of applications and specifications.
-Review the chart to identify the axle ID you may want [The ID is listed in the left column of the chart].
-Make your selections in the drop down boxes and radio buttons below.
-Add your configured axles to the cart and checkout.
-Click here for our visual online ordering tutorial

A Dutchman representative will review your order and call to confirm your information once submitted.

This listing is for GM Buick, Olds, Pontiac cars only. Click on a link above if another application is desired.


WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Write Your Own Review
You're reviewing:Buick Olds Pontiac Stock Replacement Rear Axle | Bolt in Type | Single
Copyright © 2017-2022 Dutchman Motorsports, Inc. All rights reserved.