Wheel Bearing Identifier

REAR AXLE BEARINGS | PRESSED ON | BOLT IN AXLES

Type: Aftermarket Ball
Our Name: 533, 564, & 45mm Oring
Industry part #s: 
-RW-508-ER [1.531 ID]
-RW-508-ER1562 [1.562 ID]
-RW-508-ER1771W [1.771 ID]

OD: 3.150
Outer race width: .825
ID: 1.531, 1.562, 1.771
Inner race width: 1.083

Applications: 
-Ford 9" [Big bearing]
-Any converted housing using Ford big bearing housing ends

Type: Oem Taper Roller
Our Name: Set 20
Industry part #s: Set 20 | A20 | BR20

OD: 3.150
Outer race width: .825
ID: 1.562
Inner race width: .872

Applications: 
-Ford 9" [Big bearing]
-Any converted housing using Ford big bearing housing ends

Type: OEM Taper Roller w/stepped loc ring
Our Name: Set 20 / step loc ring
Industry part #s: Set 20 | A20 | BR20

OD: 3.150
Outer race width: .825
ID: 1.562
Inner race width: .872

Applications: 
-Ford 9" [Big bearing]

NOTE: The stepped loc ring enables the use of a inner housing seal [a Dutchman exclusive!]

Type: Aftermarket Taper Roller with Stepped loc ring
Our Name: SS20 [Super Set 20]
Industry part #: Dutchman SS20

OD: 3.150
Outer race width: .825
ID: 1.562
Inner race width: .872

Applications: 
-Ford 9" [Big bearing]

>Click Here< for a detailed look at this Dutchman exclusive!

Type: Oem Taper Roller
Our Name: Set 10
Industry part #s: Set 10 | A10 | BR10

OD: 2.875
Outer race width: .730
ID: 1.562
Inner race width: .872

Applications: 
-IHC, Wagoneer, Jeep, Ford 9"

Type: Oem Taper Roller
Our Name: Set 80
Industry part #: Set 80

OD: 3.150
Outer race width: .868
ID: 1.771
Inner race width: 1.045

Applications: 
-Ford 9" [Deep bore housing ends]
-Jeep J4000

Type: Oem Taper Roller
Our Name: Set 7
Industry part #s: Set 7 | A7

OD: 2.875
Outer race width: .840
ID: 1.562
Inner race width: .870

Applications: 
-Mopar cars and trucks
-Ford pu
-Reverse taper bearing-requires preload

Type: Aftermarket Ball 
Our Name: ST400
Industry part #s: ST400 | MO400

OD: 2.875
Outer race width: 1.135
ID: 1.562
Inner race width: .825

Applications: 
-Mopar cars and trucks
-Ford pu [conversion]
-This is the non-adjustable green ball bearing that replaces the Set 7, requires NO preload!

Type: Oem Ball
Our Name: 507ER
Industry part #: RW-507-ER

OD: 2.835
Outer race width: .885
ID: 1.378
Inner race width: .925

Applications: 
-55-56 Chevy

Type: Oem Ball
Our Name: 307R
Industry part #: RW-307-R

OD: 3.000
Outer race width: .905
ID: 1.378
Inner race width: .925

Applications:
-57 Chevy

Type: Oem Ball
Our Name: 607NR
Industry part #: RW-607-NR

OD: 3.000
Outer race width: 1.032
ID: 1.378
Inner race width: 1.032

Applications:
-58-64 Chevy

Type: Aftermarket Ball
Our Name: RW903RCJ
Industry part #: RW-903-RCJ

OD: 2.562
Outer race width: .755
ID: 1.378
Inner race width: .905

Applications:
-AMX [Note: These are the 1 piece axle conversion bearings that don't require pre-load]

Type: Oem Ball
Our Name: 507CR
Industry part #: RW-507-CR

OD: 2.750
Outer race width: .660
ID: 1.378
Inner race width: .700

Applications:
-Mid to late 60's BOP [Buick, Olds, Pontiac]

Type: Oem Taper Roller
Our Name: Set 9
Industry part #s: Set 9 | A9

OD: 2.562
Outer race width: .670
ID: 1.378
Inner race width: .810

Applications: 
-Late 60's & early 70's BOP [Buick, Olds, Pontiac]
-80's & 90's Camaro, Firebird, TA